Predictions: Isothermal

Predictions of the signal, conversion, conversion rate, concentration or reaction rate can be made for different isothermal temperatures:

First, a Method/Model (model-free or model-based) needs to be selected (here: Friedman), where only those models are offered with which the data were already analyzed.

• The Minimal and Maximal Temperatures define the minimum and maximum isothermal temperatures.
• Temperature Step defines the difference between each isothermal temperature.
• Time is the maximum time of the simulation.

Default values are suggested by the software according to the experimental data.

Show Temperature program can only be activated if the X-axis unit is set to time.

Press Calculate for calculations/update of calculations.

Exemplary results:

In this example, various simulated conversion curves for different isothermal temperatures are shown as a function of time. The isothermal temperatures are displayed, too.

Customization and exporting of the results can be done via Ribbon Toolbar.